- Surfaces planed to display wood grain
- Thickness may occasionaly vary by up to 1/4".
- Will not contain soft rot, wane, cracks or pith
- Solid knots up to 1/4" are allowed
- Contains at least 80% sapwood
- May contain ambrosia streaks
- May contain light mineral stain
- Contains curly figure through at least 75% of each blank
Kiln Dried Curly Hard Maple
Suitable for inexperienced turners. Wood is typically tan or white in color. This species is moderately hard. Grain
can be straight or wavy. Cutting requires sharp tools. Sands to a high lustre, finishes easily, and is stable when
dried.
Please note: Kiln dried woods may vary in thickness by up to .25".
Kiln dried to below 10% moisture content
End grain sealed in wax to maintain moisture content
Protective wax seal guaranteed for 30 days
Guaranteed defect-free (Full quality standards listed below)
All orders fulfilled within 2 business days
Shipments fully insured against loss and damage
Special Note:
These pieces may occasionally contain light mineral stain or an ambrosia streak. Curly figure runs through at least 75% of each piece.Please note: Kiln dried woods may vary in thickness by up to .25".
Kiln dried to below 10% moisture content
End grain sealed in wax to maintain moisture content
Protective wax seal guaranteed for 30 days
Guaranteed defect-free (Full quality standards listed below)
All orders fulfilled within 2 business days
Shipments fully insured against loss and damage