- Surfaces planed to display wood grain
- Thickness may occasionaly vary by up to 1/4".
- Will not contain soft rot, wane, cracks or pith
- Solid knots up to 1/4" are allowed
- Contains at least 80% heartwood
- Contains moderate to heavy ambrosia streaking
- May contain light mineral stain or figure
- Contains insect holes caused by the ambrosia beetle
- May be cut a little uneven due to warping while drying
Kiln Dried Ambrosia Maple
Suitable for inexperienced turners. Wood is typically tan or white in color with streaks of color throughout. This
species is moderately hard. Grain can be straight or wavy. Cuts well. Sands to a high lustre, finishes easily, and
is stable when dried.
Please note: Kiln dried woods may vary in thickness by up to .25".
Kiln dried to below 10% moisture content
End grain sealed in wax to maintain moisture content
Protective wax seal guaranteed for 30 days
Guaranteed defect-free (Full quality standards listed below)
All orders fulfilled within 2 business days
Shipments fully insured against loss and damage
Special Note:
Streaks in these pieces are caused by the ambrosia beetle, so insect holes may be present in the wood. Will contain moderate to heavy quantities of ambrosia lines. These pieces may also occasionally contain light mineral stain.Please note: Kiln dried woods may vary in thickness by up to .25".
Kiln dried to below 10% moisture content
End grain sealed in wax to maintain moisture content
Protective wax seal guaranteed for 30 days
Guaranteed defect-free (Full quality standards listed below)
All orders fulfilled within 2 business days
Shipments fully insured against loss and damage